Comet Park it Easy

Kotkankatu 9
00510 Helsinki
open weekdays 8.00-16.00
Sales: 010 830 8550
Support: 0100 87 870
info@comet.fi

Comet - NET

Username:

Password:

Instructions how to load money by using miniUSB-cable

1) Check that Comet is switched off
2) The system asks if you have installed the Comet driver. If you have installed it, proceed by clicking “Yes”.
3) Connect the Comet to your PC with a MiniUSB cable and click "Connect to my Comet". After you have clicked it, your Comet serial number and bank balance of your Comet written in blue will appear.
4) Proceed by clicking “Continue”
5) Choose your type of payment (credit card) and click “Continue”
6) Fill in all fields necessary concerning your credit card infromation. Card number is printed in front of the card, and CVC/CVV (card verification code, 3 digits) is printed behind the card next to signature field (Mastercard and Visa). CVC is printed in front of an American Express Card (4 digits)
7) After filling in all the details of your card and sum of money to add, click ”Total charge” –button.
8) You will see total charge with added service fee. Fee is not depending on the selected payment type.
9) Next, you may confirm the payment by clicking the ”Make payment” –button, which is activated. If you choose to click ”Decline”, you may change the details of payment.
10) After clicking ”Make payment” –button, site checks out the details of your card. ”Payment accepted” appears on your screen, if payment was OK.
11) If te payment was OK, the selected sum of money will automatically be transferred to Comet. Please note: Comet has to be connected to the cable whole payment process.
12) After money is transferred to your Comet, there will appear ”OK. Money loaded OK, Comet can be disconnected”.
13) After this message is displayed, you may disconnect Comet. You may also print a receipt or send it to your mail.
14) REMEMBER TO CHECK that saldo of your Comet has increased. Switch on your Comet and you will see amount of euros after BANK text on Comet display. Please note; Comet saldo increases only amount of SUM OF MONEY TO ADD, not amount of total charge.
1) Check that Comet is switched off
2) The system asks if you have installed the Comet driver. If you have installed it, proceed by clicking “Yes”.
3) Connect the Comet to your PC with a MiniUSB cable and press "Connect to my Comet". After you have clicked it, there will appear Comet serial number, and bank balance of your Comet written in blue.
4) Proceed by clicking “Continue”
5) Choose your type of payment (internet bank)
6) Fill in all required fields, sum of money to add and your internet bank.
7) After filling all the details, click ”Make payment” –button
8) You will see next page, where you can see total charge (selected reloading sum added with 10% service fee) and you may confirm your payment. You can click ”Vahvista tilaus” (confirm payment) –button to confirm payment and continue to your internet bank page. You may cancel payment, by clicking ”Keskeytä”-button (cancel).
9) If you chose ”Vahvista tilaus” (confirm payment) you will be directed to your internet bank. Make payment there by using your security codes etc.
10) When you have confirmed payment at your internet banks page, you will return to our page. Please note: when you return to our page, DO NOT click on BACK/FORWARD buttons of a brower or any other buttons, until you see our page, where you fill in details of internet bank payment.
11) DO NOT DISCONNECT COMET. After you return from your internet bank, an if the payment was ok, the selected sum of money will be transferred to your Comet
12) After the money is transferred to your Comet, there will appear a message ”Money loaded OK, Comet can be disconnected”.